Depending on which side (shady or sunny) the room is located on, the appropriate lighting device is selected. If the room is located on the sunny side, then it is supposed to use the lamp only in the evening and at night. Thus, it is better to opt for a small floor lamp, which can be conveniently placed in the corner of the room, or you can purchase a hanging lampshade, placing it in the center.
When the room is in a shady location, the luminaire should be used regularly throughout the day to create a cozy environment and provide missing lighting. Therefore, it is better to purchase several small devices for uniform illumination of the space.
In the kitchen area, it is advantageous to use a lighting device with an adjustable suspension or on a cord, with which you can change the height of the location depending on visibility. By placing the pendant higher up, you get an enhanced glare, the low placement will help create a romantic setting.
In addition, a well-chosen lighting fixture not only decorates the room, but also helps to hide some visible imperfections. To visually increase the height of the ceilings, use models in which the flow of light is directed upward. If you put a bright light accent on the walls, you can increase the space of the room, and vice versa.
Fabbian and Ideal Lux are one of the leading Italian lighting factories. They annually release new original and practical lamps for the correct organization of interior lighting.
How to care for a purchased lamp?
It is known that all lighting fixtures need to be cleaned periodically. Crystal lamps are one of the most fragile and expensive models. Such a product requires special and careful care.
Use special spray detergents to clean the devices. This product is intended for cleaning crystal, varnished elements and other coatings. After covering the lamp with liquid, wait for it to drain and wipe with a soft cloth. Only 2 hours after the end of cleaning, you can use the lamp to illuminate the space.
There are other cleaning methods as well. You can remove and disassemble the lighting fixture and separately clean each of the parts and then reassemble the fixture.
If the shade is made of glass (opaque or transparent), you can wipe it with a damp sponge previously moistened with detergent solution. Then wipe the cover with a dry, soft cloth.
