How is the installation of tension beds in apartments and zamіsk houses of Kyiv and Kyiv region - an algorithm?
At the start, a baguette is attached to the wall along the perimeter of the stone. It is a profile made of plastic (hard plastic), or a profile made of duralumin. With the help of a harpoon, the canvas is fastened with a harpoon.
Method of fixing the profile for the installation of a tension steel sheet Demi- Lune This is the same configuration for rich firms. But the similarity is still present. On the cob of the profile, it is necessary to designate the lowest cut of the primary stele in the room. Far down, two centimeters are seen.
For technical purposes, the next work interval. Dali, the mark is transferred to all places in such a room. Next, you enter the robot with a winding cord. For the help of such a cord, that barnnik is drawn a line for further fastening to a baguette.
Let's go to the next stage. They fight at the adopted kuti with the utmost accuracy. Let's sweat a baguette on the wall.
How is the process of installing tension beds?
- The baguette rail is being prepared. Її dozhina - from three to four meters.
- The rail is fastened to the wall. Tse roblyat for help dowels and screws. You can speed up with a pneumatic pistol and special. flowers.
- The top edge of the baguette is due to the line that was applied before the cym.
Upcoming stage:
- larynx of the canvas,
- tensioning of the stretching steel.
The canvas is being unpacked from freezing during frequent heating up to forty or fifty degrees Celsius.
The base cut of the canvas is curved onto the spadix. Yogo is chipped for a harpoon with a special attachment, which is called a "crocodile".
Farther, such beautiful canvases are opening. Otzhe, the canvas was torn and sealed. After such a procedure, it is time for planned heating. The canvas needs to be brought to condition, if yoga can already be pulled.
If you don't warm up the canvas well, it will be easy to stretch the stele. If it's overheated, there will be problems looking at the hanging from the roof profile. Before that, the overworldly heating is badly indicated on the lacquer canvas, it is wearing out its own gleam.
After that, the apex blade is inserted into the harpoon groove and the harpoon of the canvas is fastened to the baguette. If all the kuti are fixed, the practitioners begin to fix the straight edges of the stele behind the help of special shoulder blades.
Then the months for the end of the seam are to be filled. Then, all the months, sequentially divide into two parts, and fill the central part. Further, residual fastening of the entire perimeter of the canvas is carried out. If the work is completed, the quality of the fixed whole canvas is re-verified, the width is re-verified, with which the canvas adheres to the baguette.
Kіntsevy pіdbag robіt marvel at the side https://www.demi-lune.com.ua/ua/gallery.html , de tension stele presented over 400 hundred photos with a description.
