Irritation on metal is a wide-ranging problem that affects many vehicles, tools, household appliances and other metal germs. This will not deprive it of a new appearance, but will weaken the structure of the metal, which can lead to its destruction. In this article, we look at a number of effective ways to remove iron from metal, and also to prevent it from appearing.
Lesson 1: Preparation
Before printing a printed image, it is necessary to prepare the working area and tools. You will need:
- Dry mittens and eyepieces
- Metal brush or emery paper
- Retailers of Iran (for example, ocet, citric acid and special chemicals)
- Ganchirki or sponges
- Seal for metal protection (primer, farb, oil)
Krok 2: Mechanical history
The first step is mechanical removal of rust from metal. This can be done using a metal brush, an emery paper or a grinding machine. It is important to carefully remove the upper ball of the iron without damaging the base metal.
If the soil is not deep, it is enough to use a coarse emery paper or a metal brush. In cases where the rust is heavily embedded in the metal, more aggressive methods such as grinding may be necessary.
Croc 3: Stazing of chemical products
After mechanical cleaning, chemical agents can be used to remove excess moisture and prevent its reappearance. There are a number of options:
1. Otset. The original table fruit effectively grows vegetables. Soak the rusty object for a few years or wipe it with plaster soaked in sulfur.
2. Citric acid. Here's another natural brewer from Irzhi. Prepare a mixture of citric acid and water, soak a rusty object in it and leave for a few years.
3. Soda. Apply a paste of soda and water to the rusty surface and let it sit for a few minutes, then wipe with a sponge or brush.
4. Special chemical agents. There are also ready-made items available on the market for harvesting fries. The stench may be effective, but may require careful handling, and the debris may be toxic.
After drying chemicals, carefully rinse the metal with water and dry it.
Croc 4: Metal processing after removal of iron
To avoid the reappearance of rust, it is necessary to clean the cleaned surface. You can earn money in a number of ways:
- Farbuvannya. Apply anti-corrosion primer and adhesive to the metal. This is to create a dry ball that will cross the contact between metal and moisture and wind.
- Oliya chi visk. For small metal objects, you can use oil or wax to create a dry melt on the surface.
- Electrolytic protection. In connection with cars and other great metal vehicles, you can consider the methods of anodic or cathodic protection.
Prevention of Iran
To ensure that your country is unique in the future, follow a few simple rules:
1. Keep metal in a dry place. Be careful to save metal items in areas with high humidity.
2. Carry out regular inspections and inspections. Regularly inspect metal detectors for rust and remove them promptly.
3. Vikoristovyte zahisni pokrittya. Apply dry coatings to the metal, such as farba, wax or oil.
Visnovok
Metal removal is a complicated process, as long as you follow the correct methods and use the right tools. By following simple rules for the care and protection of metal, you can significantly extend the life of your metal components and preserve their beneficial appearance.
