Gas silicate adhesives are used to join blocks of gas silicate, aerated concrete, slabs, bricks, as well as when leveling various surfaces, gluing structures that are no more than 1 cm thick. Adhesive for gas silicate blocks helps to build strong walls.
Gas silicate glue is a glue-like dry composition, which includes cement, various additives with water-retaining and plasticizing properties, and small fillers. Gas silicate glue is resistant to moisture, temperature extremes, excellent bonding properties, strength and ductility, good thermal insulation. Gas silicate adhesives do not leave any difficulties when applied to blocks, bricks, slabs.
Adhesive for gas silicate blocks is applied on a flat, dry and clean surface. It is prepared right before use. The glue is added to water, mixed well until a homogeneous mass is obtained. After 5 minutes, stir it again. The gas silicate glue is mixed manually or using a special tool. Gas silicate glue retains its properties for 1.5 hours. The quality of the glue depends on the correct dilution with water, so you should carefully read the instructions before dissolving it. The glue dries completely and gains strength after 2 - 3 days.
It is better to entrust the connection of gas silicate blocks to specialists. Precision is required when applying the adhesive, as the joint thickness should be only 2 mm. At greater thickness, it cracks or bursts. The cost of gas silicate glue is high.
