But even relatively recently, they did not even dream of using welding on construction sites. The conditions here are too specific and far from ideal for the welding process.
But time passed, and technologies developed rapidly. Equipment has appeared that can be delivered to the construction site without any problems. Manufacturers have launched a wide range of electrodes, significantly expanding the capabilities of the welding process.
As a result, it became possible to quickly and cost-effectively perform work that previously required the involvement of a large number of specialists and significant time for installing rivets or bolts.
At the same time, the quality of the welded joint is in no way inferior to that obtained by traditional methods, and often even surpasses it.
This was the practical result of hundreds of experiments, during which the welding technology was simultaneously developed and new welding electrodes and related equipment.
Many new brands of electrodes were given a start in life for the first time thanks to the specialists of the SpetsElectrod company, who are constantly replenishing the market with their new developments of consistently high quality.
The success of welding depends on a combination of several factors. Of course, the qualifications and experience of the welder. Of course, from the use of the appropriate equipment. And, of course, from the use of the most suitable brand of electrodes.
For example, welds on carbon and low-alloy steels can be made efficiently and reliably using welding electrodes МР-3С. But to connect parts made of chromium-nickel corrosion-resistant steels, it is better to replace them with OZL-8 electrodes.
At the same time, electrodes, which have sufficient versatility in order not to constrain the welder in choosing equipment and conditions for welding, began to be in great demand on construction sites.
Indeed, in cramped technological rooms, among the interweaving of pipelines and metal structures, it is not always possible to sufficiently clean the parts to be joined. Rescue electrodes capable of performing high-quality seams on an oxidized and dirty surface.
An attractive quality of the electrode is considered to be the ability to work on different equipment and conduct welding with alternating or direct current of any polarity.
