A large assortment of equipment for joining and repairing rubber products allows buy a hydraulic vulcanizing press . This type of press is used for vulcanizing rubber products. The main distinguishing properties of this equipment are simplicity and ease of operation, as well as the ability to quickly and easily repair.
Depending on the number of heated plates, vulcanizers of this type are 1, 2, 3, 4, 5 and 6-storey. Superheated water, steam, high-boiling organic compounds, mineral oil, etc. can be used as a heat carrier. To achieve a temperature close to 200 ° C, it is advisable to use electric heating.
Electrically based vulcanizing presses ensure quick and easy reaching of the required temperature. This not only simplifies the operation of the press, but also enhances the production culture. Typically, heating control in such equipment is automatic. To speed up the cooling process at the final stage, the hydraulic vulcanizer can be additionally equipped with a water cooling system.
Among the presented equipment for vulcanization you can buy a PST press , which is a portable device. The advantage of portable equipment is the ability to operate it both in stationary workshop conditions and directly on the conveyor.
The PST-type vulcanizer is equipped with heating plates with dry heating elements and a pressure unit made in the form of a hydraulic plunger. It is powered by an electrified or manual hydroelectric station.
With the help of this press, all types of rubber-fabric belts for conveyors, including heavily loaded ones, are joined using the hot vulcanization method. The temperature of the heating plates is automatically regulated and monitored by a digital indicator on the control cabinet. This greatly facilitates the control of the vulcanizer and makes its work more efficient.
A nichrome spiral located in a ceramic insulator serves as a heating element in the PST press. And in order for the heating field to be uniform, the spiral is pre-stretched. Such heaters are able to provide more uniform heating, in contrast to tubular devices, which are often found in some models of presses. The maximum width of the tape that can be joined using this equipment is from 1200 mm to 2000 mm.
