Decking is a modern building material traditionally used for roofing, fencing and wall decoration. In addition, corrugated board is often used for the construction of various structures, for the restoration of buildings that are already in use. Nayad with other types of rolled metal, corrugated board in Tyumen is presented in a large assortment.
Such a wide range of use of corrugated board is due to the fact that, in addition to a respectable decorative look, it is also characterized by its own bearing capacity. The basis of any corrugated board is steel sheet. The thickness of the sheet used for the manufacture of corrugated board is selected based on the future purpose of the product. Typically the thickness is between 0.6 and 1.0 mm. But quite often enterprises, at the request of the customer, can make corrugated board and thinner, which reduces the cost of their cost. The bearing structure of the H75-750 corrugated board is suitable for the construction of large shopping centers, stadiums, markets. Profiled sheeting is made on rolling mills, which set not only the thickness of the product, but also the height of the corrugation. It can vary in accordance with GOST from 10 to 114 millimeters. This parameter significantly affects the strength characteristics of the sheet.
The covering of the corrugated board can be different. The most famous and widespread is galvanizing. The polymer coating is applied over zinc if the corrugated board will be used for decorative purposes. In addition, the polymer will protect the product from corrugated board from corrosion and rust. This coverage is usually warranted for over 20 years. And the price is correspondingly higher. Galvanized corrugated board can be painted with special paint in different colors at the factory. Such products can be selected for every taste. Good decorative fences with high strength characteristics are obtained from colored corrugated board.
