Masonry mesh on teplo-stal.com is most often used in the construction industry. A variety of buildings are erected from it, ranging from zoo cells to the construction of residential buildings. This reliable and simple material is capable of giving additional strength to the walls, therefore, the masonry mesh is mainly used as a reinforcing element in the construction of monolithic reinforced concrete or brick buildings. It is widely used for reinforcing road surfaces, brickwork, pouring floors, foundations, as well as finishing works (plastering walls, laying tiles). They enclose territories with a masonry net, build greenhouses and small greenhouses.
Produce a masonry mesh from a strong wire, located on a plane in two mutually perpendicular directions. The cruciform connection e at the intersection is carried out by spot resistance welding in accordance with GOST. For its manufacture, a material with a diameter of 3-5 mm is used. Masonry nets are made of two types, namely, with rectangular or square cells. They produce nets in rolls or flat (sizes from 1x2 m to 3x9 m), tied in bags.
For convenience in the selection of material, the masonry mesh is made in cards. When reinforcing masonry, a mesh with cells of 50x50 mm is used. When laying at 1.5; 2; 2.5 bricks are used, respectively, cards with a width of 0.38; 0.5; 0.63 m.
Masonry meshes with mesh sizes of 100, 150, 200 mm are effectively used to reinforce cement and sand-based screeds.
In the construction industry, wicker mesh, better known as chain-link mesh, is also widely used. In monolithic construction, reinforcing cages are used, made of solid or flat reinforcing bars.
