Your "horse" has a clogged injector. The engine starts up worse and worse, more and more gasoline goes out, pops are heard in the exhaust system. In general, there is little good and you decided that it was time to clean the injection nozzles. But which way to choose? In this article, we'll go over all the ways.
The simplest and most common way is to add flushing fluid directly to the vehicle's fuel tank. Of course, all harmful deposits will soften, flake off and burn in the combustion chamber. But at the same time, it must be borne in mind that all this dirt will begin to move along the gas pipeline and will not only clog all filters, but can also clog the already smallest opening of the injectors.
The most popular method among the people is when, without removing the nozzles from the engine, they are washed using an installation that is connected to the fuel supply system. Moreover, the flushing fluid travels only through the fuel line, bypassing filters and a gas tank. This liquid consists of a larger number of different additives than an additive in gasoline, ultimately, the injectors themselves, the combustion chamber, valves are cleaned, and carbon deposits on the piston rings are also destroyed. This method is certainly better than the previous one, but you will not be able to determine what the spray pattern has become and how well the injectors have cleaned without disassembling the engine. After cleaning, it is imperative to change the spark plugs, as all residual dirt will get onto the spark plugs when flushed, which will impair their performance.
Of course, each car is different and what helps one can be detrimental to another. One owner, having made a rinse, will feel the benefit and will be happy, while the other will be disappointed, having not received the desired result, although it may not even be a matter of the nozzles.
The last method is ultrasonic flushing. Usually this method is used when the contamination of the injector is very strong. After such flushing, it is mandatory to check the nozzles for their performance, performance and spray pattern.
In conclusion, we can say that no matter how thoroughly the nozzles are washed, they will never become like new, and of course the duration of their operation will not be increased. Cleaning the injector in Khabarovsk will not be able to eliminate and restore the mechanical deterioration of the injector. Also, ultrasound can damage the ceramic component of the nozzle, leaving cracks and chips.
And in the end, let's summarize the pros and cons of flushing the injector in Chelyabinsk.
Pros:
- the process is simple and quite fast.
- the ability to restore an expensive or rare injector.
- you can check the condition of the injectors from time to time.
Cons:
- when cleaning certain types of nozzles, it may be the case that there is little or no effect at all.
- cleaning does not give a full guarantee that after it everything will work and that the injector will be restored.
- if the cleaning technology is neglected, there is a possibility that the nozzles will simply be completely ruined.
