In order for your garden, alpine lawn or lawn to delight you, you need to pay due attention to watering areas, especially in dry weather. Auto-irrigation is the most efficient system that can provide the plant with the required moisture level. The autowatering system is programmed taking into account plant varieties and their need for irrigation, forecasts of weather forecasters, and other information. The system is programmed not only for the start and end of irrigation, but also to set the water temperature, irrigation intensity.
The automatic irrigation system can be used both on a farm plot and on an agricultural enterprise. With their help, lawns, flower beds, greenhouses, vineyards, orchards and vegetable gardens, as well as football and golf courses are irrigated. The installation of an automatic irrigation system significantly saves time, effort and money for maintaining green areas. Other advantages of the automatic irrigation system include the following points:
- autonomous irrigation without the need for human control;
- save water and energy;
- the autowatering system can be adjusted and programmed according to the required parameters;
- The installed wind and moisture sensors control the water flow so that the soil is not flooded.
In order to fully automate the irrigation system, irrigation controllers are used. They are universal, with their help you can achieve almost any interval of the system operation, turn-on time. To minimize time and labor costs, the right solution is to install irrigation nozzles . The main advantages of these elements are the low price. At the same time, high-quality watering and reliable operation will be ensured. The nozzles are stress-resistant, equipped with a special filter to prevent blockages.
Before starting the installation of the system, a project is being developed in which the irrigation area and the throughput of the water supply system are calculated. Irrigation controllers must be installed in such a way that they are easily accessible if necessary.
During the installation of automatic irrigation, it is necessary to lay the main pipeline along the site. After the gasket, the nozzles are installed. Also an important point is the installation of filters, in the event that water is taken from an open reservoir. After the completion of the installation work, a test run is carried out, during which it is determined whether the connections are tight. If everything is normal, then the start and end of the injectors are programmed.
