Unmeasured reinforcement from the manufacturer is a bundle of hot-rolled steel that is uneven in length, the shape of the bars of which has special transverse ribs. Like dimensional reinforcement, it is used in various areas of construction.
Bars of different lengths are produced by hot rolling from various grades of low-alloy and carbon steel. All production is strictly regulated by standards and special specifications. According to its characteristics, non-dimensional fittings are no different from measured rods. The only difference is the length of the item. The length of off-gauge rolled metal ranges from 1.5 to 12 meters, depending on the application. Also today you can choose between a smooth and periodic profile. The diameter of the reinforcement ranges from 8 to 32 millimeters. High-quality rolled metal has a clear structure and profile without signs of deformation. The price of rebars of off-gauge length is significantly lower than its counterparts in standard length, making it quite popular in various areas of production.
Where is the reinforcement used?
It is possible to order inexpensive combined reinforcement in Moscow with delivery to create reliable reinforced concrete structures and supports. Most often this type of reinforcement is used:
- in low-rise buildings;
- when erecting strip foundations;
- construction of residential buildings;
- steel mesh tab;
- reinforcing walls and concrete slabs.
Due to the presence of transverse stiffeners, a more reliable adhesion to the concrete matrix is created, and this type of profile also increases the wear resistance characteristics. The material has increased strength characteristics, since it is made from different grades of carbon steel using a special metal hardening technology, which significantly increases strength characteristics. In addition, the material has good characteristics of weldability and corrosion resistance, as well as a special degree of viscosity, which makes it suitable for use in the construction of foundations.
Differences between measured and unmeasured reinforcement
Rolled metal supplier offers measured and unmeasured rebar, manufactured according to the same standards, with even relief and high-quality scroll structure. These two products have absolutely no difference in quality. The only difference is the size. That is why many people prefer unmeasured fittings from the manufacturer , as they have a lower cost. C
