Before carrying out patching or major repairs of asphalt pavements, it is necessary to quickly and accurately remove the old layer. Milling is recognized as the best method for dismantling asphalt. The technology has many advantages, including high speed, excellent quality, and relatively low cost. The cost-effectiveness of the process is due to the absence of the need to purchase expensive equipment. On the site https://dorozhnik-f.ru rent of a cutter for removing asphalt is provided by Central Federal District, nearby regions and all over Russia. Customers also have the opportunity to use the services of professional operators.
Advantages and feasibility of milling technology
This technology is aimed at quickly cutting only the top layer of asphalt pavement. In this way, defects, fragile materials, irregularities are eliminated. The result is a smooth base, ready for "fresh" paving.
Professional equipment is used for asphalt milling. The technique is notable for its versatility and versatility. Works can be carried out by cold and hot methods. The popularity of the technology is justified:
- excellent work quality;
- no debris;
- sustainability;
- with minimal time and effort;
- low cost.
The use of special equipment significantly reduces the volume of labor-intensive operations. This reduces the number of workers involved in the repair of roads, highways, sidewalks, parking lots, etc.
Milling makes it possible to carefully control the cutting depth, the parameters of the transverse, longitudinal slopes. A large assortment of cutters allows you to select the ideal equipment and optimize processes.
Types and advantages of renting cutters
Powerful and reliable cutters come at a huge cost. But patching and major road repairs are carried out relatively infrequently. It makes no sense to buy equipment, then look for a place to store it, put it on the company's balance sheet, and attract maintenance personnel. It is much easier to arrange a lease only for the duration of the planned work. The cutters will be delivered to the site at the agreed time together with qualified operators.
As for the types of equipment, they differ in size, productivity, width of the working body, maximum immersion depth, basic configuration and additional elements. The cutters can grip from 0.3 to 4.2 m in one pass, penetrate from 0.1 to 0.3 m.
