Any rolled metal is quite versatile and can be used as a raw material for subsequent production, or as a finished material. Pipes are especially popular not only in the creation of communications, but also in construction. Square pipe on https://global-metall.ru/truba_provilnaya/truba-kvadratnaja/truba-40x40 /, due to its complex profile, is used in dozens of different fields. Including as load-bearing parts of some structures.
Features of profile production
To make a square tube, use one of two methods. An existing round classic steel pipe can be taken as a blank. Or make a complex profile from a steel strip of the required dimensions. The second production method has more advantages and is much cheaper for the consumer. The production process itself consists of the following stages:
1. Hot rolled steel strip is rolled into a tube.
2. Passing the workpiece still hot through special shafts under a square or rectangle.
3. Final calibration for the required exact size.
The weld is practically invisible on the finished product. Does not protrude above the surface and does not interfere with the use of rolled products. In fact, the weld has 95% of the strength of a fully seamless analog.
Practical use
The pipe was created and is successfully used in the creation of steel structures. Due to the particular profile, it can withstand significant static and dynamic loads. But, the scope is not limited to this only:
- as decorative elements;
- in the production of inexpensive but durable furniture;
- laying of well-protected communications;
- steel frame for advertising media;
- railings and stairs.
The square pipe is successfully used both in private households and in industry. A fairly wide range of products allows you to choose the optimal profile for your tasks. The most commonly used profile is considered to be a pipe with an edge width of 40x40 mm. It creates sufficient rigidity for furniture or any other frame. Perfectly resists everyday stress for a long time.
