Positive and negative qualities of self-leveling industrial floor

Laminate, ceramic board and linoleum are important materials used for flooring. For premises where the impact of severe loads and environments of various levels is possible, another option is used. It has been in high demand lately. This is the operation in residential and industrial premises of self-leveling industrial floors.

Due to temperature extremes and high humidity in kitchens and bathrooms, ceramic tiles are often used as a finishing material for floor coverings. Since it can withstand the load of the above indoor environments well. Microorganisms and fungi that can penetrate the concrete base through the seams of the ceramic tiles create a destructive effect. Therefore, self-leveling floors that do not have seams are more appropriate than ceramic floor slabs. With polymer flooring, the floor becomes strong, reliable and lasts a long time.

Long service life, pleasant appearance, gloss - these are all the positive features of self-leveling industrial coatings. For rooms with strong exposure to negative environments, epoxy and self-leveling polyurethane floors are more appropriate. Since such coatings have high chemical resistance and are more moisture resistant. Flooded floors with the above coatings will also be useful in garages where there is a possibility of oils and alkalis getting on the floor.

Various detergents and ordinary water are well used when cleaning bulk industrial floors. In other words, they are easy and simple to remove. The absence of gaps and seams on such a coating, a good connection with any type of base - these are the main advantages in the characteristics of a self-leveling floor. Its other positive qualities: non-toxic; hardly flammable and flammable; fireproof. Polymer self-leveling industrial floors are also well placed on oily surfaces. With their help, it is possible to create various design ideas on the floor surface, since they have a good appearance.

Replacing a self-leveling floor with another floor if repair work is necessary is a laborious and expensive procedure. This quality of self-leveling flooring considers it to be the main negative quality. Another disadvantage of such floors can be noted their obsolescence: the old self-leveling floor over time can acquire yellowness under the influence of ultraviolet rays. But there is also a way out of such situations. A new layer of a different color can be applied to an old yellowed surface.

Another important disadvantage of the self-leveling floor is the organization of a concrete or other type of base before the polymer self-leveling layer is applied. So the most difficult and expensive is the process of preparing the base, rather than laying the self-leveling industrial floor. The concrete base must first be leveled, then all cracks and damage must be putty. It so happens that you have to work with several layers of concrete base before you get the desired result, sometimes you even have to apply paint on the concrete to the base. Otherwise, the self-leveling floor will be of poor quality and less durable.