At its core, the labeling of cable lines and cables contains the goal of achieving maximum convenience, safety and functionality. This allows us to ensure the quality work of specialists in the use of cable systems and installation.
The main requirement for order in cables and lines is accuracy in filling out the magazine, which testifies to all marking procedures, which can be carried out using a Ukrainian printer, which will not be difficult to buy.
Now let's move on to the actual labeling rules :
1 . Hidden cables need tags in wells, sewers, near the couplings for connection and at the ends of the last couplings.
2 . Each cable line must have a name and serial number. The tags must be installed on all cable glands. In the form of sequential beeches (A, B, C, etc.), marking is carried out for all parallel cables in one line.
3 . Square tags are designed for cable lines with a power of up to 1000 W, round - over 1000 W, triangular - for control lines.
4 . If the cable products are in boxes and on trays, then tag marking is carried out with a frequency of 1 tag /50m. It is also necessary to mark the connections to the electrical equipment and the turns of the track.
5 . For exposed cables, the marking is carried out using tags. They must be placed in trenches, at the “intersection” of walls, turns of the track, at the end and beginning of the tray and the box.
6 . On the territory without structures, signs with the designation of the picket number and a red voltage sign must be installed.
The tag indicates data on the design designation of cable lines, the voltage under which the line operates, the cross-section and grade of the wire, the end and start point of the lines. It also contains information about the length of the cable line.
There are some templates for labeling information that are used for marking cable lines. The obverse indicates line voltage, design data, line start and end points. On the reverse side - the brand of wire and cable, length, cross-section and number of cores. The number and date of installation are indicated on the coupling.
In order to produce marking, you can purchase a foreign or Ukrainian printer, which will not be difficult to buy. Our website and our consultants will always help you make the right choice.
