The concrete blind area is an integral element of the building’s foundation, which protects it from moisture and damage. The technology for installing a concrete blind area includes several steps, following which will allow you to achieve a high-quality result.
Step 1. Preparing the site
The first step is to prepare the place where the blind area will be located. It is necessary to remove the top layer of soil and level the surface so that it is horizontal and has the required dimensions. You also need to make sure there are no plant roots or other obstacles.
Step 2. Installation of formwork
Next, you need to install the formwork, which will serve as a form for pouring concrete. Formwork can be made from various materials, such as boards, metal profiles or plastic sheets. It must be installed around the entire perimeter of the blind area and must be strong enough to withstand the load when pouring concrete.
Step 3. Installation of fittings
After installing the formwork, it is necessary to install reinforcement that will strengthen the structure of the blind area. The reinforcement can be made of metal rods or wire. It must be located along the entire perimeter of the blind area and have sufficient strength to withstand the load.
Step 4. Pouring concrete
After installing the reinforcement, it is necessary to pour concrete. Concrete must be of high quality and meet the requirements of building codes. Order material only from trusted manufacturers, like slavyane-kgd.ru in Kaliningrad. Filling must be carried out gradually, layer by layer, to avoid the formation of voids and cracks. It is also necessary to ensure uniform distribution of concrete over the entire surface of the blind area.
Step 5. Care and maintenance
After pouring concrete, it is necessary to give it time to harden and dry completely. This may take from several days to several weeks depending on conditions. It is important to prevent water from entering the surface of the blind area during hardening and not to allow loads on it until it dries completely. In the case of work in hot weather, on the contrary, it is necessary to wet the surface with water so that the mixture hardens gradually and evenly, without the formation of cracks.
In conclusion: the technology of constructing a concrete blind area involves performing several steps that are important to achieve a quality result. It is important to follow all recommendations and requirements of building codes to ensure maximum strength and durability of the structure.
