For the successful operation of metal base , weighing equipment is simply vital. But not every scale will work here. The specifics of the arrangement of any metal warehouse: this is work with relatively small volumes, but at the same time with a very impressive weight. Loading and unloading of railway wagons, vehicles must necessarily pass through the weighing station. Hence, we conclude that in the work of a metal warehouse, automobile and carriage scales are suitable. You can look at auto scales available on the Russian market at www.onlinescales.com . A two-in-one combination is ideal.
The complete set of both weighing equipment includes: Strain gauge force, wiring kits and, in fact, a lifting device and a system of connectors for connecting a PC and the corresponding software. Also, these scales are divided into fully electronic and electronic with a mechanical start. Electronic scales start the weighing period themselves, end it themselves, and reset themselves for the next weighing. With mechanical start - the operator gives the command to start and end the weighing procedure, and he himself zeroes the balance and equalizes the errors.
Requirements for the operation and maintenance of the scales - they must be certified, the installation site must be sealed and leveled (if there are no special installation requirements), all electronics and cable components must be hermetically sealed. The weighing platform itself must be clean. Repairs are carried out only by licensed specialists. An exception is painting the scale cover, removing snow and ice. If you follow all the rules of operation, the scales will serve for many and many years.
