A sheet of corrugated board in Kiev can be wall, roofing and load-bearing, depending on the scope of application
The profiled sheeting is a thin-sheet galvanized steel with a decorative protective polymer coating, rolled on a roll-forming mill. Rolling from a smooth sheet, a profiled sheet is obtained with stiffening ribs of different depths, depending on the application.
For the manufacture of profiled sheets and metal tiles, manufacturing companies use a galvanized roll with a metal thickness of 0.4 to 1.00 mm and a width of 1250 mm.
Sheeting depending on the scope of application may be:
- Wall profiled sheet .. The rib height of such a sheet is from 6 to 20 mm. It is marked with the letter "C". It is successfully used in the construction of fences and barriers at construction sites, in cottage townships, in summer cottages, when fencing private land and agricultural land. Wall corrugated board is an ideal material for cladding facades of modular buildings, prefabricated frame structures, supermarkets and shopping and entertainment centers, warehouses and hangars.
- Roofing profiled sheet. Rib height from 20 to 57 mm. Marked with the letter "K". It is used for installation and dismantling of roofs of any complexity with a roof slope of 10 mm or more. It copes well with wind and snow loads in our region, it is indispensable for the construction of roofs at industrial facilities with spans between supports up to 3 meters.
- Bearing profiled sheet. Rib height from 57 and above. It is marked with the letter "H". It is indispensable for the construction of interfloor floors, for the installation of fixed formwork for pouring concrete, as well as for the installation of industrial roofs with spans of 3 meters or more. The load-bearing capacity of such a corrugated board is the highest, so it can be used as an independent load-bearing element in the construction of pre-fabricated building elements.
Sheets of corrugated board, regardless of the scope of application, are produced up to 12 meters long, however, there are manufacturers who can roll corrugated board up to 13 and 14 meters long, such as Steel World . For the production of load-bearing corrugated board, this company uses galvanized steel with a metal thickness of 0.5 to 1.0 mm from the Mariupol plant. Ilyich, as well as imported steel in bays produced in Romania, Slovakia and Russia.
The main advantages of the profiled sheet are its durability, fire safety, a wide selection of grades and types of profiling, as well as the possibility of reusing the sheets after dismantling.
