Rebar A500C class is a practical rolled metal produced from hot-rolled steel. Today, it is this material that has become widespread not only in Russia, but throughout the world. The popularity and demand for rental is due to its excellent qualities and excellent characteristics. You can purchase A500C fittings by placing an order on the website metavto.ru
Description and main characteristics of A500C fittings
Rolled metal fully meets the high requirements prescribed in international standards. A500C fittings produced according to GOST contain a low percentage of carbon. It is this distinctive feature that provides the material with good weldability, as well as durability and excellent plasticity. The letter "C" in the abbreviation for fittings indicates that it can be used for welding. The weldability of the material is affected by the low content of alloying substances.
Rolled products can be sold in coils or coils, if its diameter is up to 12 mm, or in bars, if the material has a diameter of more than twelve millimeters. The minimum length of the rods is six meters, the maximum is 25 meters. The most popular are fittings, the length of the rods of which is 12 meters. The weight of A500C reinforcement depends on the diameter of the product.
Rolled metal is produced from steel of various grades, for example, St3PS or St3SP. The maximum yield of such materials exceeds 500 MPa. This is the kind of steel used by the EU countries. The chemical composition of the material used for the production of rolled products contains a maximum of 0.22% carbon.
Certificate for reinforcement А500С testifies to the high quality of rolled products. The material has the following main distinguishing features:
- about improved strength characteristics and ductility, as well as the absence of weak points where material destruction can occur;
- significant savings in steel volumes are observed in the manufacture of fittings;
- low production cost;
- resistance to various negative influences and aggressive environments.
A500C fittings have proven themselves excellently when used in compressed products. It improves the quality characteristics of concreting. The properties of rolled metal make it possible to use it in the creation and production of critical structures and strategic structures.
The fittings are used for making fire and standard ladders, various lattices for windows and other design elements. High quality and durable arm
