Solid fuel boilers are used to heat small houses and industrial premises. These boilers have a central heating system for the preparation of hot water and heat supply. Solid fuel boilers are divided into several classes: automated boilers and manual boilers. Solid fuel boilers here are selected depending on the heat supply tasks. And such a company as Alliance-Energia LLC will provide the optimal boiler and related equipment, solid fuel boilers for household and industrial purposes, taking into account the customer's requirements and as soon as possible.
Solid fuel boilers with automated loading
Boilers and automated fuel supply equipment are modern automation systems, which are controlled by a processor. These boilers operate in an automated process with very little supervision and maintenance. The main priority fuel for automated boilers is sawdust and pellet (with 49% moisture content and up to 50 mm in length). Specialized equipment for fuel supply is calculated and selected, and manufactured separately, taking into account the customer's requirements, as well as the installation technique.
Manual fired boilers
Manual boilers operate on coal, sawdust, briquettes. With a large load of the chamber, air will not enter the fuel combustion area, as a result, surface combustion occurs, which does not allow achieving the required performance of a solid fuel boiler. It is recommended not to overlook the moisture content of the combustion fuel, remember that the higher the moisture content, the lower the performance.
In lower combustion boilers, combustion takes place at the lower level of the fuel load, that is, the grates. Combustion oxygen is supplied through a primary air damper, which is regulated by a draft sensor. In the combustion chamber, bricks made of refractory concrete are used, which act as a catalyst and also help to maintain the desired combustion temperature.
It is recommended to use solid fuel boilers with automatic feeding, which are used for heating industrial premises and private houses.
