Daily and seasonal operation of any equipment leads to its gradual wear. Timely repair of the conveyor konvejer.com/articles/riflenie.html will allow its operational properties to be fully restored. First of all, the conveyor belt is subject to increased wear, with which there is constant physical contact with the rollers and the transported cargo.
What determines the efficiency of the pipeline
Even if bulk materials are transported with a slight slope, the presence of special hooks on the belt significantly increases its efficiency during operation. The greater the slope, the more obvious the presence of a correctly selected profile. Replacing a conventional profile with a chevron one will achieve the following advantages in practice:
- Use a transport conveyor with up to 45 degrees of incline.
- Significantly increase the transfer rate of the required amount of bulk raw materials.
- Minimize the risk of cargo loss during transportation.
- The ribbed surface does not damage the rollers and the drive drum.
- Reluctant to damage cargo and bulk materials during transportation.
Important: Sufficiently flexible tape remains effective over a wide range of temperature fluctuations. Able to effectively cope with variable loads, both indoors and outdoors. But, even in this case, the conveyor equipment needs maintenance and periodic repairs.
Features of conveyor repair
Regular maintenance of belt conveyors minimizes the risk of an emergency shutdown of equipment during the work process. Maintenance will allow you to timely notice and recognize nodes that are in a worn condition. Have them repaired or replaced completely. Most often, the following parts are subject to replacement or repair:
- guide rollers;
- transport belt due to damage;
- drive shaft and its guides;
- regular cleaning and lubrication of moving parts;
- Fixing other minor defects.
The availability of all the necessary parts, or the ability to produce them at the repair organization's own facilities, increases the speed of restoring the conveyor's performance. This is especially important for stationary structures that are difficult to dismantle and transport to a repair base. A quality repair depends on many factors, but mainly due to the professionalism of the mechanics and the availability of the necessary spare parts.
