There are many technologies on how to achieve the cleanest surface of a metal or concrete slab. You can order sandblasting services here, and count on the highest quality result with a minimum waiting time for the finished result. But, is this method as universal as it is commonly believed.
Sandblaster for metal
Ferrous and some non-ferrous metals, when exposed to normal atmospheric air, are prone to a chemical reaction called corrosion. If the metal surface is not protected, rust will turn the steel part or structure into a potentially dangerous thing in a relatively short period of time. But, before covering the metal with paint, it must be cleaned. The sandblaster has the following advantages:
- The fastest processing of large surfaces.
- Individual choice of abrasive material for different metals.
- Even relatively thin steel sheets can be machined.
- No additional stripping required.
- Sandblasting is possible in stationary conditions and on the road.
The quality of the finished result is difficult to compare with alternative methods. If the specialist has correctly selected the abrasive, the apparatus under pressure removes only corrosive deposits, while not damaging the metal base of the products at all. After processing, it is enough to degrease the metal and you can apply a protective, paint and varnish layer.
Sandblaster in construction
Repair work done with a simple hand tool takes a lot of time, or forces you to use additional labor. This approach significantly increases the cost of restoration of any building. The sandblasting machine also has its advantages in this case:
- the fastest possible preparation of walls, ceilings and floors;
- high-quality removal of old paintwork and plaster;
- cleaning walls, tiles and asphalt from graffiti and other inscriptions;
- removal of old mold that cannot be treated with chemically active substances;
- A sandblaster is even suitable for some wood surfaces.
It is difficult to enumerate all the advantages of the time-tested method of surface preparation for subsequent repair or application of a protective layer. The sandblasting machine has only one conditional drawback if it is used on the road. There is a lot of dust in the work area. Which can be partially leveled by using water.
