Wooden window frames and double-glazed windows have too many disadvantages. In addition, natural material must be constantly looked after. It is enough to choose a more practical solution on the website https://www.veka-portal.ru/ of the VEKA Systems company to automatically increase comfort in an apartment or in a private house. Modern window designs isolate the room much better from cold, noise and dust from the street.
Aluminum window frame structures
The non-ferrous metal profile is highly durable and can be used as long as the building itself. Perfectly resists all negative factors of exploitation. But, the high cost of individual production of such windows does not allow them to be used everywhere. Other equally important aspects of this choice should be added:
- Windows can be very large, without lintels.
- There is no need to worry about additional structural reinforcement.
- Swing doors will not sag under their own weight.
- Easy sealing with standard rubber bands
- Minimum weight of the entire structure compared to the alternative.
Metal profile is most often chosen by commercial organizations, offices and apartments in high-rise buildings. High-quality installation of sliding aluminum windows will provide access to fresh air. The sashes will not clutter up the interior space of the room, especially in small apartments.
The usual plastic windows
In its pure form, the plastic profile is practically not used. There is always a small amount of metal in the design of such frames. It not only correctly distributes all the loads on the structure. But it also provides it with the necessary rigidity. In addition, this design has an affordable cost for the consumer. Other qualities of a metal-plastic window should be added:
- wide choice of colors for the window polymer profile;
- minimum loss of heat and coolness inside the premises;
- high-quality isolation from harsh and unpleasant sounds;
- ease of operation of the swing mechanism;
- Blind windows can be large, without lintels.
If you need balcony glazing in Moscow, you can choose both plastic and aluminum options. Pure non-ferrous metal is much more reliable and durable. But, if you give preference to a responsible manufacturer, the metal-plastic construction will be no less practical, but at a more favorable cost for the consumer. The only conditional drawback is that even the best polymers have a service life of no more than 40 years.
