Universal, industrial gearboxes are highly valued in the manufacturing and construction industry. Most often, this mechanism is used to reduce the speed of rotation of an electric motor while increasing the gear ratio and torque. Universal chelyabinske-detail">Ts2U-200 reducer is used both in lifting mechanisms and in a number of other devices.
Key technical benefits
Sufficiently durable design withstands significant loads during occasional or everyday use. It is for this reason that the gearbox can be used as an element of the lifting mechanism. The gears have a strong mesh and can operate both clockwise and counterclockwise without any negative effects on the teeth. Other equally important technical characteristics should be added:
- Suitable for outdoor and indoor use.
- Does not need additional protection from rain, cold and dust.
- Requires minimal maintenance to change lubricant.
- Competent distribution of loads on the body and attachment points.
- The design uses roller bearings.
Rejection of ball bearings significantly affected the reliability of the gearbox. It not only withstands static, but also dynamic loads. Requires a minimum of time for maintenance and an impressive margin of safety. Can work for years without changing gears or roller bearings.
Practical application
The Universal Gearbox does not have the single, narrow specification it was designed for. On the contrary, universal characteristics allow it to be used almost everywhere, in industrial installations. A high gear ratio produces a huge amount of torque that can be transmitted to the following mechanisms:
- conveyor mechanisms of various designs;
- crusher or agitator drive;
- lifting mechanisms, cranes, elevators, platforms;
- other types of mechanisms where a reduction gear is needed.
Recently, the gearbox has found its application in the agricultural industry. Automatic animal service lines need reliable mechanisms capable of transmitting the required torque in terms of strength and speed. The reducer of the Ts2U series will quite cope with the task.
