Home • Publications

Repair of rolled waterproofing when you need to change, and when - patch up

The repair of waterproofing depends on the state of the material, its damage, causes. If rolled waterproofing is severely damaged, serious breaks are available, replacement is necessary. With minor damage, if there are small cracks, cuts, chips, it is possible to patch with the help of repair mixtures, special mastic for waterproofing. High-quality Rolled waterproofing shows on the Kraska KZ website.

Effective repair

In order for the repair of roll waterproofing of the roof to be effective to adhere to useful recommendations:

It is necessary to evaluate the condition, inspect the roof. The waterproofing should be checked for the presence of cracks, ruptures, bubbles, signs of aging. It is important to identify the sources of damage.

The surface should be prepared. The overwhelmed area should be cleaned of garbage, dust and dirt. It is necessary to wipe the surface. Excessive moisture will interfere with the repair.

Depending on the condition, such as rolled waterproofing, you can use different repair methods. This can be the use of mastic, sealants based on bitumen for small cracks, cuts. In case of serious damage, you need to replace the coating.

To restore waterproofing in the presence of serious damage, combined materials can be used. It can be bitumen polymer membranes. They provide longer protection.

Repair for the foundation

I understand how to repair the roll waterproofing of the foundation, it will be effective for damage, wear, and violation of tightness. The repair process depends on the type of damage, the state of waterproofing. Here are the main important steps:

It is necessary to inspect the basis of the delight of the analysis of visible damage. Their sources should be determined.

It is important after the repair work to conduct a test for tightness. To do this, the moisture meter is used.

, as additional measures to increase the degree of waterproofing and preventing repeated damage, it is important to regularly inspect the foundation, and prophylactic care.

When repairing roll waterproofing for the foundation, you need to choose high -quality materials. They should be resistant to aggressive influences. This applies to changes in temperature, moisture, chemicals.

Useful tips

It is worth listening to useful recommendations:

If rolled waterproofing has peel off what to do the question that is relevant for many. In this case, it is necessary to evaluate the damage site. If only part of the coating is peeled off. The support is in good condition, the repair can be local.

Witting up to seal rolled waterproofing, bitumen mastics are effective. They are used to seal cracks, cuts. A strong water -repellent layer is formed. Easy to be applied with a brush or spatula.

In order to understand how to fill a hole in rolled waterproofing, a thorough mount is necessary. This will help maintain properties and avoid moisture penetration. If the damage is extensive, repeated. A complete replacement of the coating may be required. The waterproofing for new damage should be regularly checked. So it will be possible to prevent more serious problems.

A common problem is the bloating of roll waterproofing repair and this is possible as a result of air accumulation, moisture under a layer of material. The coating is damaged. To eliminate the swelling, restoration of the tightness of waterproofing, it is necessary to evaluate the causes, prepare the surface, release air, cutting the waterproofing.